CORK FLOORING MAINTENANCE
Regular cleaning and maintenance are essential to maintain the long life and good looks of your flooring. With our cork flooring this is easily achieved: simply sweep or Hoover regularly and then wash your floor, using a damp cloth or well-wrung mop. It is important not to use excessive amounts of water.
We recommend using a PH neutral cleaner or liquid cleaner for wood flooring. Never use cleaning products with abrasive, alkaline or solvent-based ingredients (e.g. acetone). Never use wire brushes. As a general rule, always follow the detergent manufacturers’ instructions and contact them for additional details when required.
Dirt or grit can cause scratching on any floor surface, so for daily maintenance, you can also use an antistatic dust sweeper. Take care to wipe up any spillages, spots or marks as quickly as possible. Always use a door mat near external doors to catch dirt and moisture. Do not use latex or rubber backed mats, rubber furniture feet or rubber wheeled castors.
In a kitchen, place area rugs or mats in front of the appliances and sink to protect your cork floor from heavy traffic, water spillages, dropping food, grease, and other factors that can cause premature wear of your kitchen floor
The most common form of physical damage is indentation marking from pressure points such as high heels and legs/castors from furniture and appliances. We recommend the use of castor cups or felt foot pads wherever possible. Office roller chairs must comply with EN12529 (Type W). Use protective office mats under the wheels.
Do not drag furniture across the floor. If building or installation work is being carried out in the room where the floor is installed, protect it with craft paper, plywood or hardboard.
In kitchens, avoid damage from appliances by placing a sheet of hardboard between the appliance and the floor. When moving the appliance simply slide from one hardboard sheet to another.
Take care with cigarettes, kitchen utensils, hot or heavy objects which if dropped can damage the floor covering.
Cork, as a natural material, may tend to fade when exposed to sunlight over a period of time. It is important to move area rugs and furnishings to allow for even colour change. Use blinds, curtains or other sun screening systems to minimize this effect.
If a room is intensively heated, the indoor air humidity may drop so low that the floor could dry out. As cork is a natural material, this may cause shrinkage of the tiles that will result in minor gaps in the flooring joints. Use a room humidifier to prevent this. The recommended room conditions are 35-65 % relative humidity at 20°C.
If your flooring is fitted with underfloor heating, please note that rugs or mats placed on top of the floor may function as heat accumulators and increase the floor surface temperature more than the maximum surface temperature recommended (22 ºC).
For periodic maintenance, polishing and stripping products are available, please contact us for details.